download thunderbolt driver for mac pro 3,1

Download thunderbolt driver for mac pro 3,1 mac os x#
Download thunderbolt driver for mac pro 3,1 update#
Download thunderbolt driver for mac pro 3,1 upgrade#
Download thunderbolt driver for mac pro 3,1 software#

I'm using OWC Mercury Extreme Pro 6G SSDs with a Tempo SSD or Tempo SSD Pro adapter in a Thunderbolt Expansion Chassis and the system hangs after waking from sleep. Tempo SSD Pro Plus Quick Start Guide ĭescription: Japanese instructions for installing the Sonnet Tempo SSD Pro Plus PCIe card into a supported Mac or Windows computer. After completing, remove the CD and reboot the computer. It should find one or two devices, depending on your product. replace the ROM image with the original Once in the DOS shell, change to the TempoSSD directory by typing

The Tempo card must be present in the system when this utility is run. Then, it can be booted from it will run a DOS-type shell (actually FreeDOS).

The included disk image file must be burned to a CD. replace the ROM image with a BIOS only image replace the ROM image with the original ( a combined EFI/BIOS image) Typically only newer (2012+ Windows Machines) implement EFI. Normally this utility is not needed however, if you are using any of these products in a Windows machine that implements EFI (Extensible Firmware Interface), we have found some of these machines are incompatible with the Mac-based EFI boot ROM that ships with the product.

Download thunderbolt driver for mac pro 3,1 upgrade#

Tempo SSD/SSD Pro/SSD Pro Plus/SATA Pro 6Gb 4-Port Firmware Updater (Windows)ĭescription: This installer will upgrade the firmware in a Tempo SSD, Tempo SSD Pro, Tempo SSD Pro Plus, or Tempo SATA Pro 6Gb 4 Port card to remove or add the EFI or BIOS boot ROM image. After the firmware is updated, your card will continue to operate as before when installed in a Thunderbolt-to-PCIe expansion product or in a Windows PC Do not shut off your computer while it is updating the Tempo card's firmware the card may become disabled Press the return key to close the firmware updater application and restart the computer. Note that you will be prompted a second time if you are updating a Tempo SSD Pro card type 'y' again.ĩ. Type 'y' when prompted the Tempo card's firmware will be updated. Restart your computer the firmware updater will load, appearing as text on a black screen.Ĩ. Select your Tempo card (if it isn't already selected), and then click Update.ħ. In the Applications folder, locate and double-click the Marvell9182FlasherGUI.app file to launch the firmware updater application.Ħ. Note that in order to complete the installation, you may have to navigate back to the Finder to click OK in a dialog window stating the application was installed.ĥ. Follow the onscreen instructions the updater application will be installed into the Applications folder. Double-click the Marvell 9182 Flasher Installer X.x.pkg file to launch the updater application installer.Ĥ. Locate and, if necessary, open the MarvellFlasherGUI.dmg file.ģ. Click the Download Now button to the right.Ģ.

Download thunderbolt driver for mac pro 3,1 update#

This firmware update enables your card to support booting when the card is installed in a Mac Pro running OS X 10.6.8+ġ. You need this update only if your version of a Marvell card will not support booting in a Mac Pro. This updater will not work on the most recent versions of these cards that have an ASMedia SATA controller. Later versions of these card (mid 2014 and newer) with the Marvell controller have current firmware.

Download thunderbolt driver for mac pro 3,1 software#

Note: You will be redirected to the manufacturer's download page.ĭescription: This macOS software updates the firmware in very early versions (mid 2014 and earlier) of Sonnet's Tempo SSD Pro, Tempo SSD, and Tempo SATA Pro 6Gb 4-Port PCIe cards with the Marvell SATA controller.

Download thunderbolt driver for mac pro 3,1 mac os x#

Operating System Requirements: Mac OS X 10.6.8+